|Material||MS SS Cuuting|
|Country of Origin||Made in India|
|Application Temperature||5 to 40 Degree Celsius|
|Coverage||Approx. 100 meters of running weld seam per kg of VK Jelly|
|Contact Time||5 to 30 minutes|
It is used to remove heavy scales, discoloration, annealing colors, rust particles near weld and welding affected area by heat without grinding or wire brushing or buffing.
Coverage: Approx. 100 meters of running weld seam/kg of ATM Jelly
ATM Jelly does not give Black or Yellow stain marks on Surface after washing with water.
1)ATM Jelly is applied on weld seam surrounding areas with a nylon bristled plastic brush. Application Temp. = between 5 – 40 deg. C
2) Keep ATM Jelly for 5 to 30 minutes (contact time) depending on contamination, temperature grade of Stainless Steel.
3) Use pressurized water jet spray OR wipe the weld seam lightly with plastic brush wash with water thoroughly.
Reviewed by 63 Users
Most Relevant Reviews